There are a lot of dual extruder 3D printers out there, so it’s easy to become overwhelmed with options.
If you want to be able to print in two colors or with water-soluble supports, or if you want excellent detail, you may need a dual extruder 3D printer.
Various features and specifications need to be considered.
However, heed the warning. There are many 3D printer companies professing to offer good dual-extruder models, but, truth be told, most of them are not that good. We screened each dual-extruder 3D printer in this category to make sure we weren’t wasting your money or time on a sub-par machine, which is why we chose the top 7.
1. Ultimaker S5 (Our Top Pick)
In this list, the Ultimaker 3D printer stands out as the best. The printer also has the smallest footprint on the market for dual extruder 3D printers.
You shouldn’t listen to a friend who tells you not to get an Ultimaker product. The company’s machines are the best of their class. That also applies to the S5. To slice, you use Cura, a free program.
When you plug in the system, it requires a few minutes to set up before you can start using it. After plugging it in when we arrived at work in the morning, we were ready to print by lunch – which was a great achievement for me, as I was a complete amateur at the time.
With a professional-grade printer, you’ll get quality, precision, and versatility. This dual-extruder 3D printer produces high-quality 3D prints.
Those with professional backgrounds, medium-sized companies, and aspiring professionals can use it.
Pros
- High-quality printing
- Excellent adhesion of the mattress
- Can print with a variety of materials due to the high max temp of its two extruders
- A large number of builds
- Especially suitable for support material, dual extrusions provide quality
- Ready-to-assemble
- A Touch Screen For Easy Navigation Is Also Included in the UI
- To monitor progress, a camera was installed
- Machine with a quiet motor
- You can easily turn off the cabin light or keep an eye on your print with the adjustable light included in the cabin
Cons
- Costs a little too much
- We print faster than our competitors
2. BCN3D Sigma R19 (Best Value)
Those familiar with the Sigma brand may be familiar with the mechanics of this printer. Despite looking the same as before, the engine has been heavily reworked. New printing modes and design enhancements can be attributed to the new IDEX system.
In addition, the new model features numerous UI updates.
Although the temperature on the bed is a little lower than you want, you’ll experience some problems with adhesion at first. With the new wizards, the calibration and installation procedures can be handled quickly.
The Sigma R19 offers a lot of value for the money. It’s a great camera.
Pros
- Independent print heads are cooled by two fans
- Fully Colored Touchscreen
- Frame made of metal
- An Easy-to-Use Calibration Wizard
- A large number of builds
- There is plenty of documentation available for maintenance (easily accessible)
- Ink-jet print bed of high quality
- For the price, the product is excellent
Cons
- During the course of your production, you will have to purge a lot of material – this will cost you more in the end
- Quite loud compared to other printers
- Get Your Bed Adhesion Right In A Short Time
3. Flashforge Creator Pro (Our Budget Pick)
Flashforge Creator Pro is a good choice if you want an upgrade but can only afford a beer budget. A machine like this one comes at such an unbelievably low price, that it’s almost blinding. This 3D printer still ranks among the best despite its low price.
The price was kept low by overlooking a few good designs, but the performance is still good.
It’s a stylish, enclosed 3D printer with dual extruders. You receive a lot of material and a sturdy frame with the Creator Pro, so it works fast. You can adjust the LED screen using its easy-to-access controls. This 3D printer comes with an SD slot, is able to print multiple materials, and has dual extruders.
Pros
- Heat Retention & Better Prints in An Enclosed System
- Extruders are kept cool with dual fans
- Filament is included in 2kg of this kit
- Steel frame is durable
- This is a great value for the price
Cons
- It Is Unfavorable to Level 3 Knobs
- It’s Tricky Calibrating Y, Z, And X Rods
- Intensive Noise Operation
- There Is Not Much Build Volume
4. Geeetech A10M (Best For Makers)
The Geeetech A10M is the perfect tool for makers. Despite its low cost, this printer delivers acceptable quality. It can also 3D print just about any kind of material because the nozzle gets so hot.
They can get away with a lesser than ideal final quality since the intended audience is not professional or even semi-professional.
My favorite aspect of this printer is the forums on Geeetech’s site; there’s a very strong sense of community among people who use it.
Even all these years later, I still get shocked at how preassembled the printer is considering the sticker price is so low.
Pros
- Ask questions and provide suggestions to the Geeeetech community
- Extremely concerned about costs
- Silicon Carbide Glass Coated With Microporous Surface Is Used For The Heated Bed
- Easy changeovers and troubleshooting with the top-feed filament extruder
- Ready-to-assemble
- Different materials can be printed with a really high extruder temperature
- Support material extrusion with dual extruders
Cons
- On this machine, the electronics are prone to failure
- You Want More When Quality Is Good
5. Qidi Tech X-Pro (Simplest To Use)
You probably want a 3D printer that’s easy to use if you’re new to 3D printing. If a 3D printing expert is asked to recommend a simple-to-use 3D printer, the Qidi Tech X-Pro will come to mind.
With the magnetic build plate and removable print stick, removing a print stick is a breeze.
There is a slicer program available with Qidi, which is easier to use than Cura.
There’s an instruction video on the flash drive that comes with the printer, so you won’t feel helpless during installation. The dual extrusion ends up with good consistency, despite all of its simplicity.
Pros
- Definitely worth the sticker price
- Using It Is A Breeze
- Printing chamber enclosed
- Built-in magnets and removable build plate
- Ready-to-assemble
- Video instructions included
- LCDS Are Very Responsive
Cons
- Built-in volume is small
- This printer weighs about 62 pounds
6. Monoprice Maker Select V2 (Most Affordable)
You can clearly distinguish cheap and affordable when you look at Monoprice Maker Select V2.
This is a price point-containment printer that blows away its competitors. You don’t get everything you’d expect, but when it comes to low sticker prices, that’s to be expected.
Quality and reliability aren’t compromised. The Dual Extruder 3D Printer is a sophisticated and well-executed product, not just a simple paperweight.
It does not require soldering or power tools to assemble, even though it is not pre-assembled. After the spool holder is installed, a few connections must be made.
What is the quality of your prints?
It produces pretty good prints even at its default settings. Custom settings allow for future improvements – that’s the beauty of them!
Almost any type of material can be printed with the high nozzle temperature. Almost any material will perform well after a few tweaks. The initial setup doesn’t require any adjustments if you’re planning to use PLA only – you can start printing right away.
Pros
- Extremely concerned about costs
- Loading prints is done via USB or SD card
- Easily interchangeable in-line filament feed system mounted on the top
- Really High Print Head Temp
Cons
- Max temperature for the bed is low
- Smaller volumes are easier to build
- Fully Assembled
7. ZMorph VX (Best All-In-One 3D Printer)
If you’re interested in a dual extruder 3D printer that can do it all, then the ZMorph VX is the one to choose. Three machines in one; Laser, CNC, dual-extrusion 3D printing.
For fairness’ sake, we will just review its 3D printing capabilities.
The printer has dual nozzles and offers a great deal for the price. Despite the lack of other features, it is well worth the cost.
Dual extruders require a bit of time to install. When it’s installed, you’ll get a more or less perfect first print.
Almost all the guesswork is taken out of leveling the platform thanks to the automatic platform leveling. You’ve just got to deal with the frustration if you like to adjust things yourself.
This is an unmatched 3D printer in the category of dual-extruder machines. These 3D printers are impressive primarily because of their proprietary software.
Pros
- High-quality printing
- 3D printing experience is made easy with included software
- Maximum temperature for print heads
- Printer with super-flexibility
- Excellent value for the price
Cons
- Clogging Of The Heads Is Common
- There Is A Little Trouble Following Startup Manuals
- The bed cannot be leveled manually
Conclusion
It prints to a high standard.The BCN3D Sigma R19 is your best option for a printer.
Flashforge Creator Pro is your best option if you’re on a budget and want a dual extruder 3D printer. Despite having a lower sticker price, it still delivers great print quality.
You were made for Geeetech A10M, the maker at heart.
A dual-extruder 3D printer is the perfect choice for DIYers and hobbyists with limited experience, such as the Qidi Tech X-Pro. Using it is very simple.
Monoprice Maker Select V2, a 3D printer for those on a budget, is a great option. For a reasonable price, you can accomplish a lot.
The ZMorph VX comes in at a reasonable price, gives average performance for all categories, and is a top overall pick if you don’t have an idea what you want. It’s a fantastic machine all around.
These dual extruder 3D printers provide whatever you are looking for. Take a look at features you really love when comparing printer options, whether you’re just starting your search or you’re torn between several.
To ensure it will print your preferred material, you naturally want to ensure it has the appropriate build volume and nozzle temperature for your budget.
The selection is wide. Why are you still reading this? Print now!